首先，第二台机器生产的2穴产品的CPK值在1左右，制程精度和稳定性不够

首先，第二台机器生产的2穴产品的CPK值在1左右，制程精度和稳定性不够
我们还用第二台机器生产了同第一台机器一样的产品：速度，第二台比第一台慢，第二台48-50冲/分钟，第一台70冲/分钟，速度慢了很多。另外，CPK，第一台CPK值平均都在1.33以上，但是第二台做一样的产品CPK就差了很多，有些只有0.7，平均也只有1左右。
CPK请见附件！

結果 (英語) 1:

First of all, the CPK of 2 points of the second machine products valued at around 1, process accuracy and stability is not enough We also use a second machine to produce the same products as the first machine: speed, a second slower than the first, the second 48-50 blow/min, first 70/Min, a lot slower. In addition, CPK, the first CPK values on average are more than 1.33, CPK sent but the second does the same product a lot, some only 0.7 per cent, average only about 1. CPK, please see annex!

結果 (英語) 2:

First, CPK value of the second machine 2 points produced products around 1, process accuracy and stability is not enough
, we also use a second machine to produce the first machine with the same product: the speed, the second than the first Taiwan is slow, the second 48-50 punch / min, the first 70 punch / min, a lot slower. In addition, CPK, CPK values ​​first in 1.33 above average, but the second did the same product CPK sent a lot, some only 0.7, average only about 1.
CPK see Annex!

結果 (英語) 3:

First of all, the second machine production of LED products CPK values around 1, process precision and stability not
we also use the second machine production the first machine products: speed, the second than first slow, second 48-50 punch / minutes, the first 70 punch / minutes, the speed is much slower. In addition, CPK, the first CPK value average of more than 1.33, but second do the same product CPK is a lot worse, some only 0.7, with an average of only about 1. Please see the attachment of
CPK!